Easyboot Rx Fitting

Removing the Easyboot Rx is as easy as putting it on.

1. Loosen the hook and loop closure at the top of the boot and bend the rear of the boot collar back.
2. Pick up the hoof. Grab the boot from the bottom and slip it over the toe.
3. Push the boot on as far as you can with your hands. Do not pull on the upper material.
   
4. Place the hoof on the ground to set the heel and return the collar to the upright position.
5. Fasten the hook and loop closure at the top of the boot.
   
   

Removing the Easyboot Rx.

1. Unfasten the hook and loop at the top of the boot.
2. Pull the boot off by pulling down and away on the back of the boot.