Easycare logo

EasySoaker Lifestyle image

EASYSOAKER: Purchase | About | Application

Application

 

 

 

Prepare the hoof: Thoroughly clean hoof with hoof pick. Apply any bandages or medications directly to the hoof at this time.

 

 

  1. Putting on the boot: Loosen the webbing and hook and loop closure at the top of the boot, allowing the strap to move freely.

     

    Slip the boot over the toe and use the pull tabs located at the top of the boot to pull boot on.

    EasySoaker FittingEasySoaker Fitting

     

     

  2. Place the hoof on the ground to set the heel. Pour or add any medication into the boot at this time. Secure the boot and contents by tightening the strap. Secure the strap with hook and loop closure after tightening.

    EasySoaker FittingEasySoaker Fitting

     

     

  3. Removing the EasySoaker: Unfasten the hook and loop to release the strap. Pull the boot off by pulling down and away on the back of the boot.

    EasySoaker Fitting

     

    Important: The EasySoaker is intended for soaking and medication purposes only. It should not be used for riding or turnout. You should practice application and removal of the EasySoaker before use with medications to insure a proper fit.
Read Easycare daily blog
Like Easycare on Facebook
watch EasyCare on YouTube