|
|
|
|
|
Step by Step Easyboot Epic Fitting
with Pete Ramey
 Click to watch the video:
Pete demonstrates proper Easyboot Epic application
02:34
 |
1) Fold the gaiter back. |
 |
2) Make sure the buckle is up and the cable is loose, with the wire on top of the buckle. |
 |
3) Pull to stretch the boot. |
 |
4) Put the boot on with a twisting motion. |
 |
5) Make sure the boots are on straight. |
 |
6) Now you can pull up the gaiter. |
 |
7) Most important thing: make sure the boot doesn't twist or turn on the hoof. |
 |
8) Check to make sure the boot is below the coronet. |
 |
9) Adjust cable and buckle the boot. |
 |
10) If it is too loose, adjust cable for a tighter fit and rebuckle. |
 |
11) Make sure the gaiter goes low and tight. |
 |
12) You should just be able to fit a finger under the gaiter. |
| |
