Using the best quality photos will help us give you the best possible feedback. The following list summarizes what you will need to take good quality photos.
1. Use a late-model smartphone or a digital point-and-shoot camera with an LCD screen and memory card.
2. If using a digital camera, the best setting to use will be Auto or Portrait mode. Avoid the Macro setting, denoted with a small flower because you will need to be within inches of your subject and there is a very small/shallow depth of field. This can cause blurry pictures.
3. Do not use flash because it washes out the subject. Use natural light with no shadows. It is optimal to photograph in an even-shaded area. Avoid bright sun, deep shade or mottled shade.
4. Take the picture on a clean and level surface that is free from clutter (your tools, hoofjack, shavings/straw, etc).
5. Use a rubber mat or cement/pavement in the barn aisle for the horse to stand on if one is available.
6. Clean your horse’s hooves meticulously. Use a stiff brush to clean all mud, dirt, debris from the wall, sole, frog, collateral grooves and heels.
Once all the prep work is done, it’s time to take the pictures. Stand the horse on the level ground with “a leg at each corner”. The horse should be loading each hoof equally. Avoid a stretched-out stance and resting/cocked hind legs.
1. Take your pictures in sequential order:
Do the same series on the right side, and for other hooves you would like us to evaluate. This will help to know which hoof you are looking at when you are labeling your pictures. It will be easier if you always shoot in the same order.
2. To take the pictures, position yourself perpendicular to the horse or hoof. For hoof shots, get your camera down on the ground and perpendicular to the hoof. Caudal and solar shots need to be from directly over and square to the heels or sole. Important: fill your screen with the subject, allowing only a small margin surrounding the subject. Load the photos onto your computer.
3. Label each photo accurately before uploading them with the Fitting Assistant form below.